Repairs to uPVC Windows

uPVC is an excellent choice for modern homes. They are durable, long-lasting and easy to maintain. They are not susceptible to decay or rust as aluminum or timber.

Cleaning and lubricating regularly UPVC windows and doors is crucial. This will save you from unnecessary repair costs and increase energy efficiency.

1. Broken Glass

The damaged glass in your windows can cause serious damage to your home and even be fatal. It is essential to ensure that your windows are in good working order.

Single-pane windows are relatively easy to replace, and they will usually fit into the frames of the past easily. If you have double-paned windows which are held together by internal beading, it is more difficult to remove and replace the old panes. In this case it is essential to purchase plastic spacers in order to aid in fitting the new pane into the window frame.

Wearing protective eyewear and thick gloves is essential for anyone who plans to remove the glass by yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes so that any shards fall on the fabric and not on the floor which could cause them to be trampled.

It's a great idea to cover the gap with tape after the repairing glass has been removed. This will prevent drafts and water from entering your home until a professional arrives to repair the window. This also serves as an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may want to consider using a security door repairing that has an integrated window, as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable energy efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues, including sliding. A sagging uPVC window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's crucial to act fast to stop the issue from becoming worse.

To fix a sagging window you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. Then, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they stay in place.

If you are unable to move the hinges, you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your upvc repairs windows remain watertight and safe from drafts.

UPVC handles can also become loose. Most often this is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's a good thing that it's simple to repair the handle of a window that is loose yourself. First, you'll need to shut the window and perform an initial fitting. The corners of the sash need to align with the casing joint. If it isn't, you can use a screwdriver to loosen the handle and then turn the mechanism back into position.

3. Water Leaks

It is crucial to act if you awake each day to discover mouldy walls and floors that are wet. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature in your home. The most common reason for leaking uPVC windows is that the sealant around the frame is either damaged or not present.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, old caulking might need to be removed. It is important to keep in mind that when it comes to uPVC window repairs, you should not be tempted to 'over-caulk and then make the area harder to clean and could reduce the efficiency of your energy.

It is important to check that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious instances, you might need to consider replacing the window.

Moldy sills and rotten ones are other signs of water leakage. This fungus thrives under conditions of dampness and can spread quickly throughout the home.

If the leakage is occurring between the double glazing window repairs-glazed window, it is more likely the issue is more with the seal rather than the frame. A uPVC specialist can easily solve this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be at fault for the reason that your uPVC window is difficult to open or it opens in the breeze. They can be replaced by any competent DIYer and can usually be done within a few minutes.

Like any mechanical part, hinges can wear out over time. It's easy to change the hinges on a window, but it's easier if someone helps you to hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.

Faulty window hinges could be caused by improperly opening the window in a particular way or due to improper installation in the factory. Sending us a photo through our website can often solve the issue. We are more than happy to offer advice.

Regular lubrication of the hinges is also necessary. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also lower the possibility of a window getting stuck and stop corrosion. This must be done at a minimum every year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.

5. Draughts

Draughts in Upvc windows can be caused by a few different things. The hinges can also become disaligned as a result of wear, creating an opening between the frame and sash. They can be fixed by giving them a good cleaning, but when they're beyond repair, it could be necessary to have them re-aligned or replaced. Secondly the interlock, this is located on the hinge side of the window and can also become misaligned, again it may be feasible to give them a clean but in some instances it could be necessary to get them replaced.

These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen draughts.

The final method to cut down on the amount of draughts is to use a Draught-exclusion device. These are usually fabric tubes filled with a filler which can be placed over your window sill. They can keep your home warm by blocking out cold air.

The windows made of upvc can continue to provide excellent insulation and security for your home by performing regular maintenance and repairs to double glazed windows. However, it is important to realize that all windows have a lifespan and they may reach an point at which it is more efficient to replace them than fix them. If you have any problems with your window made of upvc, it's best to consult a professional as soon as possible.