Cat flaps allow your pet to go in and out as they please without you having to let them in or out. They also help keep your cat from having to go to the bathroom inside the house.

fitting a cat flap in a upvc door a cat flap in a door panel made of Upvc is a lot easier than a glass door, however it requires some knowledge and the appropriate tools.

Take a measurement of the door

Installing a cat door into a front door could be difficult however, so long as the cat flap is the right type and you follow the directions it shouldn't be too difficult. We will show you how to draw the shape using a jigsaw in order to cut out the door area. Then we will finish the job by attaching the cat flap. This will ensure that the flap remains in place and shields the door from wind and rain causing damage.

The first thing you need to do is determine the width of your pet to get an accurate measurement of what size of cat flap fitters near me flap you'll require. This will enable you to select a flap that is large enough for Fitting cat flap in upvc door panel your pet to walk into the house and leave without having to open the door each time.

Once you have the measurements, you can determine where on the door the template should be positioned, usually, this is done using an X. However, some kits come with drawings that show where to drill. If yours does, then you can stick it to the door and draw a line around it. If your door has sill or moulding on the bottom of it ensure that you have enough clearance from these because this will ensure your cat's safety and stop them from gaining access to your home.

Put on your eye protection and dust mask, and using a jigsaw, begin cutting along the line that you penciled in, but don't push the blade too hard because this will make it cut faster than you'd like it to. If you own a square that you have cut, use it to check whether you're cutting in the right way and also to ensure that the hole is in a rectangle. Once you are happy with this you can start to remove the rest of the door material.

Draw a Line

The cat flap lets you to let your pet go inside and out without having to worry about unwanted visitors or unwelcome gifts. It also stops draughts and keeps your home's temperature in check. However, putting the cat flap to your door could be an intimidating task for those who haven't done it before, leading many to hire an expert joiner or carpenter to do the job. This is a viable option, however you can do it yourself if your tools are right and the steps are adhered to.

While this is much simpler to accomplish with a timber door, it is still feasible in uPVC doors - although you must be careful to avoid damaging the doors, as this can end the warranty. First, you must measure the door to make sure it will accommodate the new cat-flap. If you have a standard uPVC panel it's easy. However when your door is composite door cat flap or another type of door, you might have to be more cautious.

The next step is to measure the height of your cat flap installation near me's belly. This is the distance between the floor and the bottom of your cat's stomach. You will need to locate a space at the entrance that allows your cat to move through easily. Once you know this, you will be required to mark the area using a pencil and a spirit level to be sure that the hole you make will be suitable for your cat.

After you have marked the area, it is time to cut the hole. You will require an jigsaw. It is crucial to take your time to ensure that the cuts are smooth and clean instead of rough and uneven, as it could cause damage to your door. Be sure to wear safety glasses and a dust mask when using the jigsaw, as inhaling the sawdust could be hazardous to your health. After you've completed the cutting process, you will have to smooth out the edges of the hole with sandpaper so that your cat flap will fit easily in place.

Make a hole

Getting a cat flap fitted into an existing door panel or double glazing sealed unit can be quite difficult. It is tempting to do it yourself, but unless have experience in DIY it is likely to be best to have a professional in to do the job for you. A faulty job can not only be ugly and unattractive, but could also be an security risk. It could allow cold air to enter when the cat is outside and hot air to escape when it is inside.

The first thing you have to do is mark the position of the hole in the door with an eraser and a spirit level, this will ensure that it is correctly positioned and that it runs parallel to the other components of the door. Make sure you have sandpaper to smooth out any rough edges.

After the line is marked you should cut out the hole with the jigsaw. Remember to wear any necessary safety gear for working with an electric tool. If you're worried about noise, you can buy a cordless jigsaw which is more quiet and easy to use.

It is essential to only cut away the material needed for the fitment of the cat flap. It is necessary to leave a little extra material for the wall thickness of the flap. However cutting off too much material can cause issues or even damage the door frame.

A upvc door may include a metal frame, or a panel inside that will interfere with the microchip cat flap, and in this case you'll need to make an oversize hole so that the metal doesn't get in contact with the wall of the cat flap, if this is the case, it is essential to fill in the gap and render it watertight.

If you want to install a cat flap into a double-glazed or upvc window with frames made of metal you'll need to talk to a specialist. They can provide you with a brand new piece of glass with the hole that is already designed for the cat flap. It is much less expensive to do this instead of trying to install the flap to an existing pane of glass that hasn't been designed specifically for this purpose.

Fit the Flap

Cat flaps give your pet the freedom to come and go anytime they want and let them relax in the home whenever they'd like. If you have an uPVC front door, it may be hard to install a cat flap. This is especially true if you do not own glass panels that is cut. If you are willing to install a half-glazed uPVC replacement panel, it's possible to install a cat flap. It's not as simple as simply cutting a hole through the door though and there are a few things you'll need to take care of first to make sure it's secure.

A composite, uPVC or GRP door panel is generally composed of a plastic skin which is bonded to an insulating polystyrene core. The material is extremely fragile and care must be taken when cutting through it to avoid causing damage. This kind door comes with a template that you can use to cut the hole.

After you have carved out the opening in your front door, it is time to install the cat flap. You can pick from a variety of designs, from simple push-button models to ones that are microchip-activated and only let your pet in. However, regardless of what type of cat flap you choose it's important to make sure that your cat can use the flap without becoming trapped in the weather.

A circular fitting cat flap in upvc Door panel is superior than a square one, as circles can be cut more securely into glass. This is because square holes can make the glass more susceptible to cracking if drills are used on it. This is also a safer option because you won't need to drill into the toughened glass, which could shatter and harm your pet or your family members. This is especially crucial if you have elderly or children in your home who could be injured by glass shattering.