Patio Door Lock Repairs

Over time, wear and tear can lead to lock malfunctions. There are a few easy steps you can take to ensure the security of your uPVC door.

These simple fixes will ensure your home is secure no matter if you adjust the lock or clean the locking mechanism.

Clean the Lock

Although double glazed patio door repairs doors are a great option to let in the outside and keep the elements out but they can also pose a security risk in the event that your lock isn't operating as it should. Over time, wear, tear, cold and hot weather dirt, and other debris can cause your patio door lock to become difficult to operate. Fortunately, with a little maintenance, you can ensure your patio door's locks always function correctly.

It's important to first clean the patio door lock as well as all moving parts. This helps to remove any dirt and coatings that could hinder the lock from working in the way it should. Start by wiping all the moving parts of your patio Door lock repair door lock using an aqueous cloth. Then apply a scouring pad or a damp, rough cloth to scrub the areas that are soiled of the door and frame. It is recommended to wipe the entire lock with dry cloths to eliminate any remaining dampness and allow it to air dry prior to making use of it again.

If you have an outdoor door that has a pin tumbler latch mechanism it is possible to lubricate the lock by applying powdered graphite to the key or by using an lubricant based on Teflon such as WD-40 Multi-Use Product. This type of lubricant is able to be applied with ease and does not dissolve over time. If you're unable find the right lubricant for your lock, apply a pencil that has a thicker tip. Put the pencil into the lock and move it around a bit to spread the graphite.

Regular maintenance is also necessary to keep the tracks of sliding patio doors free from dirt, dust and debris. These tracks are especially susceptible to snow and ice, which can cause them to jam or bind and make it difficult for your patio doors to open and close.

The sliding patio door repair rails of the patio door track and rollers can be cleaned by removing any damaged or dirty weather stripping, cleaning them, then reinstalling it. Patio door rollers can also be cleaned and sprayed down with an oil that is nonstick.

Lubricate the Moving Parts

uPVC french doors, similar to sliding patio door repairs near me patio doors, work by using 3-4 or occasionally five-point locking mechanisms, which include the lock cylinder and handle operated by keys. These doors also require maintenance, including lubrication of the moving parts. This can be done using an oil that is thin but not WD40. It should be done at least once per year.

If sagging hinges don't cause the problem, it could be that the door isn't aligned. It may be rubbing against or catching the hole of the strike plate in the frame. Take off the strike plate and use a sharp tool to enlarge the mortise. This will permit the latch to fit into the hole and also prevent it from rubbing against the frame.

While the cylinder is out of the way, measure its width with a book or piece of wood that will fit in the gap of adjustment screw above the lock. The outer dimension is the distance from the outside of the door to the center of the cylinder. the inner dimension extends from the center of the adjustment screw to the end of the cylinder.

Check the lock's length

If your patio door latch isn't able to turn, even after cleaning and oiling, it's possible that it is not aligned with the strike plate. Check if your door is properly balanced and that the hinge screws are tight. In a lot of cases, however, simply moving the strike plate downwards or upwards could fix the problem.

Most of the time, the issue occurs when the strike of the lock is too small for the latch to engage. In this instance, you can widen the opening using a chisel and hammer. Then test the latch so that it doesn't touch the jamb frame of the door or get caught the frame.

Before buying a replacement lock, first determine the mortise type of lock you currently have. You can do this by taking a look at the faceplate of the lock and noting if it is square or round. Take a look at each screw hole in the existing lock, and note their size. This information will aid you in finding an alternative that is the same size and is a perfect fit for the hole that you already have.

You'll need to identify the mortise lock and inspect it for scratches, bends or other damage that requires to be fixed. A badly damaged or bent latch is more likely break than one that's not used much, so be sure to replace the lock with a brand new secure and safe version when you spot any indications of damage or wear.

After you've determined the type of lock replacement you need It's time to begin the actual repair. Remove the old handle and spindle from the patio door, and then insert the new one. Begin by installing the handle in the interior and aligning it with the spindle and then securing it in place with the two screws or bolts which hold it. Once the handle's interior is installed, put in the handle that is outside and screw it into place, too. Once you have completed these steps check the handles to make sure that they open and shut easily and that the latch engages properly with the strikeplate.

Make sure you check the Strike of the door.

The strike plate and door latch are two components that work together to secure the door. Misaligned strike plate and door latches can result in the latch not being able to latch the door properly. This problem is usually very simple to fix.

First, check the strike plate's receiving holes to ensure they are free of obstructions, such as dirt or plastic plugs. Remove the screws that hold the strike plate in position. This will allow it to move vertically, but not separate it from the frame. Adjust the strike plate so that it aligns its receiving holes with the latch hooks of the door latch. After the strike plate has been adjusted tighten the screws, and then test the door to see if it shuts smoothly with the new adjustment.

Door strike plates can be a bit difficult to access for homeowners who have sliding patio door repairs near me patio doors, but they're crucial to lock and unlock your door. The plates made of metal are located between the top and bottom jambs of the door, which are where they help support the latch. The door latch is placed on the strike plate to form a seal when closed. If the strike plate has been damaged, rusted, or is not installed correctly the latch might not be able to lock the door properly.

One of the most common reasons for an outdoor door lock to stick or not close is a misalignment between the latch and the strike plate. The most effective way to test for this is with the "lipstick test." Rub some lipstick on the edge of the deadbolt, and then attach masking tape over it. The lipstick will leave an impression when you shut the door. This will indicate exactly where the latch joins the strike plate. If the mark is too low or high it is possible to adjust the strike plate.

If your sliding patio door locks aren't functioning properly, they can keep your home secure from intruders. It is imperative to repair the issue as soon as possible. If you follow these steps, you can repair the lock on your patio door and regain its functionality within a short time.