Repairs to uPVC Windows

uPVC windows are an excellent option for modern homes. They are easy to maintain and durable, as well as long-lasting. They are not susceptible to get rotten or rusty like aluminum and timber.

It is important to clean and oil UPVC doors and windows on a regular basis. This will save you from costly repairs and increase energy efficiency.

1. Broken Glass

The broken glass in your windows can cause significant damage to your home and may even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good repair.

For single pane windows, it can be relatively simple to replace them, and the new window will generally fit within the frame of the previous one easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this instance, it is necessary to buy plastic spacers to make sure that the new pane fits into the window repair frame.

If you're planning to try to remove the window panes by yourself it is important to wear the proper safety gear that includes gloves with a thick layer of material and protective eyewear. You should also lay down a drop cloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor, where they could be trampled under.

It's a great idea tape the gap once the glass is removed. This will stop drafts and water from getting into your property until a professional arrives to repair the window. It also acts as an obstruction to prevent intruders from making their way into your home. If the gap is large, you might think about an alarm door that comes with an integrated window as it offers the best of both worlds.

2. Sagging

Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems that include sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.

To fix a sagging window you can try repositioning the hinges. To accomplish this, you'll have to open the window so that you can get to the frame. Then, remove both the top and bottom hinges using a screwdriver, and then adjust them clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and verify the fitting. If you're satisfied with the fit of your window, you can tighten screws to hold them in the right position.

If you are unable to reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. If this happens, it's essential to replace the seal as fast as you can to ensure that your uPVC windows are watertight and draught-proof.

upvc window repair handles could also loosen. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to close the window and do a test fitting. The joint at the corners of the sash must align with the joint on the casing. If it doesn't you can use a screwdriver to loosen up the handle. Then, you can turn the mechanism back into place.

3. Water Leaks

It is crucial to act if you awake each day to find a smoky wall and floors that are wet. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature within your home. The most frequent reason for leaks in uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a fairly simple fix that can be completed by any competent DIYer. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer can be put on. It is essential to remember that when it comes to uPVC window repairs, you should not be tempted to apply too much caulk and then make the area harder to clean and could decrease the efficiency of your energy usage.

Make sure that the drainage holes are free of debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases, you may need to replace the window.

Moldy sills and rotten ones are other signs of water leakage. The fungus thrives in conditions of dampness and can spread quickly throughout the house.

It is also important to keep in mind that if the leak is coming from between the glass of your double-glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sliding. It is also possible to be repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or slack and blow open with a breeze It could be the hinges that are at the fault. They can be repaired by any skilled DIYer and can be completed in just a few minutes.

Like any mechanical component hinges will be damaged over time. It's easy to replace a hinge on a window repair, but it's simpler if you have someone to help hold the frame.

Verify that the upvc window repair near me hinges are closed and open in the right direction. You can do this by looking for the arrows on each hinge. This shows which way the window should open.

The issue can be caused either due to opening the window in the wrong way or by a poor installation at the factory. This can often be resolved by sending us a photo on our website. We will be happy to give you suggestions.

Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the possibility of a window sticking and prevent corrosion. Ideally, you should do this once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window repair near me.

5. Draughts

Draughts can be caused by several different things. First, the hinges due to wear and tear could become misaligned. This will cause a gap to form where the sash meets the frame. This can be easily repaired by giving them good clean, but when they're beyond repair, it could be necessary to have them aligned or replaced. The second is the interlock, which is located on the hinge side of the window, can also become misaligned, again it's possible to give them a thorough clean, however in some instances it could be necessary to get them replaced.

The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time and allow air to escape through these gaps. Replacing these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glass. This will help control indoor temperatures and lessen the possibility of draughts.

The last way to reduce the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be placed over your window sill. They will help keep cold air out and keep your home warm and cozy!

Your windows made of upvc will continue to provide excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a lifespan and eventually, they will reach a point where it is more efficient to replace them than repair them. If you are experiencing problems with your upvc windows, it is best to seek professional assistance as soon as possible.